Home / Container Cleaners & Drum Washers / Drum Cleaning Solvent

Drum Cleaning Solvent

Container Cleaners & Drum Washers


Drumbeaters #CP1131949 is a special non flammable solvent that work with our Drum Washer Systems. You can mix one part of CP1131949 with nine parts of water. This product cleans very aggressively when heated to 180F (82.22C). Drumbeaters #CP1131949 is super efficient in removing oil, dirt and grease from the interior and exterior of drum's surfaces.

Using CP1131949 in our drum washing systems you can decant the wash solution and dispose the residues from the bottom of the tank and remove all hydrocarbons and oils from the top and use the cleaning solvent over and over, you might lose about 5% of the solvent each time and because you mix with water VOC’s are not a problem when you are cleaning.

Features

  • Low toxicity
  • Natural based terpene
  • Rapid biodegradation
  • Non-ozone depleting
  • Non-carcinogenic
  • None to very faint pine odor
  • Flash point over 93C/200F

Applications

  • Oil
  • Resins
  • Glues
  • Tar
  • Grease
  • Polymers
  • Paints
  • Coatings
  • Silicones
  • Asphalt
  • Polyisocyanurate
  • Polyurethane

Request a Quote


Please submit your specific requirements as type of drums, number of drums processed per hour, type of waste, intended cleaning solution and electrical requirements (Volt & Hz).

In order to receive your inquiry check the following anti spam box:

drum saw

drum saw


About Drumbeaters of America

For over a quarter century, Drumbeaters of America has been designing and manufacturing systems that can wash, rinse, and crush drums, pack drums, remove residues from containers without increasing the waste stream, provide closed loop dispensing systems for viscous and air sensitive products, remove oil from soils, drill cuttings, and surfaces, and many more application solutions.

Drumbeaters of America Inc. specializes in engineering and manufacturing systems for industrial companies to reduce the volume of waste products generated in manufacturing, to transform the waste products so that the waste products can be recycled, and to preferably totally eliminate all wastes.

With Drumbeaters selection of equipment, all the necessary capabilities to properly remediate a wide range of waste products and to prevent the generation of waste are available. This is particularly important for companies wanting to achieve and maintain ISO 9000 and ISO 14000 certification.