Container Cleaners & Drum Washers Cleaning System
The Garbage Can Washer GCW-ITR is designed to wash and rinse the interior of garbage cans sized up to 110 gallons using water, detergent, solvent or hot water. This system uses a high speed rotary nozzle for washing 100% the interior of drums and containers. The construction is heavy duty and includes an internal recirculation tank system with 120 gallons reservoir.
The wash station has a station control box containing a start and stop button and an emergency stop button. The washing station is protected by a safety system to prevent the operator from activating a station when a garbage can is removed prior to the wash cycle being finished.
Call Us: (630)365-5527
Garbage Can Washer GCW-ITR Specifications
|Recirculation Reservoir/Sump Tank for Discharge||120 Gallon (454 liter) Capacity, 304 Stainless Steel with 304 Stainless Steel Reinforcing with integral fork lift pockets. Wash fluid drains by gravity.|
|Drum Wash Platform||304 Stainless Steel Perforated Screen with 1/8 inches holes.|
|Splash Guard/Pump Mounting||12 Gauge 304 Stainless Steel.|
|Electrical Control Panel||Painted Carbon Steel, Nema 4.|
Main Power Disconnect on the Front Cover.
One (1) PLC with adjustable timer.
Temperature control is included if the heat option is selected.
One (1) Soft Start for motor protection.
One (1) electronic safety switch (electronic photo eye).
System only washes if a drum is placed on the wash stand.
Push Button On/Off & Emergency E -Stop Controls.
|Wash Nozzle||One (1) Drumbeaters Custom Engineered Stainless Steel Fluid Driven Rotary Spray Wash Nozzle.|
|Pressure Pump & Motor||Multi-stage 304 Stainless Steel pressure building pump is powered by electric motor with electrical current at 480 VAC 3 PH 60 H. With one (1) custom removeable vortex breaker for cleaning, if needed.|
|Systems Electrical Requirements||480 volt, 3 phase 60 hertz 5 amp draw. The before mentioned amp draw does not include any additional electrical option(s). Other voltages and hertz are available upon request.|
|Fluid & Filtration System||One (1) 1" Aluminum Filter Bag Housing with Type 304 Stainless Steel Basket, Trade #4 Filter Bag Housing.|
- Unit Height 68.00" (157.48 cm)|
- Unit Width 63.0" (147.32 cm)
- Unit Depth 68.0" (152.40 cm)
- Unit Weight 1,300 lbs. (467.20 kg)
Drum Washer GCW-ITR Equipment Options
- Two (2) 5,000 Watt Electric Immersion Heaters
- Electrical requirements for 220 Volt
- Exterior Washing Gun
- Special High Impact Nozzle
- Upgrade the Electrical Control Panel Box to Nema 4X
- Steel Cover for the Wash Reservoir
- One (1) 1.5 hp 480 volt 60 hertz 2 amp draw Discharge Pump
- Electric Auto Fill for the Recirculation Tank
- Oil Recovery Skimmer System
- RT-500 Recirculation Tank
- RTF-500 (Return Tank Filtration) System
- Explosion Proof System Class I Div I Groups C & D
- Electric Heat for the internal recirculation tank - Class I Div I Groups C & D
- One (1) 1.5 hp Discharge Pump
- Explosion Proof Oil Recovery Skimmer
- Recommended Spare Parts List
About Drumbeaters of America
For over a quarter century, Drumbeaters of America has been designing and manufacturing systems that can wash, rinse, and crush drums, pack drums, remove residues from containers without increasing the waste stream, provide closed loop dispensing systems for viscous and air sensitive products, remove oil from soils, drill cuttings, and surfaces, and many more application solutions.
Drumbeaters of America Inc. specializes in engineering and manufacturing systems for industrial companies to reduce the volume of waste products generated in manufacturing, to transform the waste products so that the waste products can be recycled, and to preferably totally eliminate all wastes.
With Drumbeaters selection of equipment, all the necessary capabilities to properly remediate a wide range of waste products and to prevent the generation of waste are available. This is particularly important for companies wanting to achieve and maintain ISO 9000 and ISO 14000 certification.