|
Drum Washer-Crusher Model DWC-400PLC
(Drum destroy)
All process in one chamber. Designed to operate under continuous
heavy duty service for industrial applications
Reduces drum storage space and
disposal costs.
Standard Features:
-Heavy Duty Steel construction
-Crushes 55 gallon drums and any size pails
-Power Unit Included: 5hp motor or 10hp motor (electric)
-Compaction force from 70,000 pounds to 85,000 pounds
-Piercing point on the crushing plate
-One Wash Wand
-Fluid collection reservoir 4.5 gallons under the chamber
-Cycle time of 35 seconds
-Push Button for washing
-Directional Control Valve for crushing
-Drum ring locator keep the drum aligned
-Safety interlocks door prevent operation
-Emergency stop push button and motor starter
-Portability with Fork Lift Truck
-Electrical control box NEMA- 4
-Safety features to comply with OSHA
Additional Options:
-Recirculation
systems for the wash and rinse
-Chamber for 85 gallon drum
-Explosion prevention system
-Electric Push Button system
-Dual Wash Wand
-Nitrogen Wand
-Vent Fan
-Hepa Filter
-Galvanized Finish
-Fluid collection reservoir 30 gallons
-Automatic drum ejection system
-Automatic drum conveyor system
The wash/rinse wand travels down
through the container as the wash/rinse water or chemical is sprayed
inside of the container. The wash/rinse wand punctures the bottom of
the container so that the wash and rinse fluids drain into a
collection chamber at the bottom of the equipment.
The fluids then
drain from the fluid collection chamber by gravity or by use of a
pump. The wash/rinse wand travels up and down through the container
as many times as the user determines is necessary to achieve the
desired results.
A second spray wand can be provided to spray
nitrogen into the container if there are explosion proof
requirements to be met.
After washing and rinsing the container, the
container is then crushed.
Demo Videos
|
